The electronic carriage system
E-LINER
The E-LINER is a carriage with an electrical spool out support. The spool out force is demand-oriented adjusted, therefore no energy is wasted.

The electronic carriage system
The E-LINER is a carriage with an electrical spool out support. The spool out force is demand-oriented adjusted, therefore no energy is wasted.
The E-LINER combines longterm experience in tower yarder engineering and advanced knowledge of electronic engineering. Unlike other manufacturers the E-LINER is operated by non-temperature sensitive high voltage current condensers, which are loaded during load pulling. The separately developed rope clamp work efficently, energy saving and treat by use of aluminium clips skyline and mainline with care. The cable drop protection is slim built and allows in spite of retainer a gentle and safe support drive over.
EL30-1
In Combination with the mountain harvester MOUNTY 3000 the EL30-1 is the ideal carriage for thinnings. Silent, efficient and economical-perhaps the best description of EL30-1. Install-switch on- work-switch off.
This is how the work process of EL30-1 looks like.
EL50-1
The EL50-1 is the ideal carriage for thinnings and final fellings. The powerful spool out support works even on longer cable lines efficient and releases the chokerman. No battery change, no refilling of liquids and no engine noise.
- Can be used for up- and downhill operation
- No battery changes
- No engine noises
- Low maintenance
- No fuel consumption
- Low electric tension, therefore no danger of injury
- Charging during haul in
Radio system
- Remote control with display
- Extremely light with high battery capacity
- All the settings are possible on the remote control
- Error diagnosis display of operating data of the diesel engine and hydraulic system on the display
- Display of radio frequency and signal strength
- Universal for all Konrad machines with KFS 16
E-LINER
technical Data
General information
EL30-1 | EL50-1 | |
Weight | 590 kg ¹) | 750 kg ¹) |
Working load | 40 kN | 50 kN |
Max. paying out force | 2,5 kN | 3,5 kN |
Max. paying out speed | 2 m/s | |
Sky line diameter | Ø18 - 22 mm | |
Main line diameter | Ø10 - 12 mm | Ø11 - 14 mm |
Remote control system | KFS-16, KFS-20 |
Electric system
Capacitor section | 60 V DC (max. 64 V DC) |
---|---|
Battery section | 24 V DC |
Battery | 20 Ah (LiFePO4) |
Hydraulic system
Hydraulic oil pump | Radial piston pump, open oil circuit | |
---|---|---|
Max. operating pressure | 210 bar | |
Hydraulic system filling capacity | 10 l | 12 l |
1) Weight with resources; diesel tank empty
Optional equipment: In addition to the standard equipment, a broad range of optional equipment is also available. Further information on standard and optional equipment can be obtained from your KONRAD distributor.
The manufacturer reserves the right to make technical modifications and improvements.